Class Highlights


July Classes

Summer is here and before you get too busy making vacation plans don’t forget to schedule some summer classes too. Play for a day in a one day “quickie” or spend a whole week in an immersion class. We also have kid jewelry camps too! Here is what is coming up in July but check out our full schedule online here 

Featured Classes in July:

 

Kids wirework and beads

Jewelry Summer Camp for Kids 8-12
July 17-21, Monday-Friday, 9:00am-2:00pm,

Class Fee: $300

Looking for a fun and artistic activity for your 3rd-6th grader this summer? Have them come spend a week making jewelry with us. These week long camps teach cool jewelry making techniques such as bead making, creative wire-working, metal texturing, stamping, and basic riveting! No experience necessary and return students welcome.

Total Immersion: Beginning Jewelry Making
July 24-28, Monday-Friday, 10:00-5:00
Class Fee: $595|Basic materials included

Come spend a week taking a jewelry vacation! This class is all three of our beginning series workshops rolled into one. Each day you’ll go home dreaming about what to create the next day. Absolutely no experience needed.

One Day “Quickie” Classes:

Enamel earrings by Linnie Kendrick

                                                                                      

Kiln Fire Enameling Basics I
July 8, Saturday, 10:30-5:00pm
Class Fee: $145|Basic materials included

Get a taste for the timeless beauty of colored glass on metal. Students will learn how to properly apply richly colored opaque enamels onto flat and domed sheet metal by both sifting and wet-laying. No experience necessary.

Soldering Essentials
July 9, Sunday 10:00-4:00pm
Class Fee: $95|Basic materials included

Whether you’ve had a soldering class, attempted to learn from a book, or never even tried, if you are looking to learn how to silver-solder or just get better at it, this class is for you. Expect lots of hands-on time at the soldering table and practice with different torches. No experience necessary.

Summer Don’t Miss Classes:

Melting scrap metal in preparation for pouring into the mold.

Low Tech Gravity Casting
July 12, 19, 26, Wed Evening, 6:30-9:00pm
Class Fee:$295|Basic materials included

Learn the fundamentals of casting by exploring the ancient technique of pouring molten metal directly into molds carved or formed from sand, soft stone, and other surprising materials. This process does not require any major equipment so it is easily reproduced in a home studio or in your back yard! No experience necessary.

Beautiful shapes can be created with fold forming techniques

Fantastic Fold Forming!
July 22-23, Saturday and Sunday, 10:30-5:00
Class Fee:$265|Basic materials included

Fold forming is an exciting technique wherein sheet metal is manipulated and hammered to create fabulously textured, 3-dimensional, organic forms. This is a quick porcess, so students will have the opportunity to create a variety of basic forms in this quick workshop. All levels.

PMC…create as you would with clay but once fired becomes all metal

Bronze Precious Metal Clay Basics
July 29-30, Saturday, 10:00-4:00pm
Class Fee: $95|Materials kit $30 payed to instructor

Striking jewelry can be made easily and inexpensively with Bronze Precious Metal Clay, bronze clay that when fired in a kiln results in pure metal! This workshop will focus on the basics of working with PMC Bronze however students might also explore components for earring and pendants. No experience necessary however intermediate level students encouraged.

2017 Spring Schedule

Spring has sprung and it’s time to shake out the winter cobwebs and plant new seeds. How about planting some seeds of creativity while you are at it? This schedule has a few great opportunities for intermediate students as well as some really fun one day classes. What are you going to take this spring?

 

Guest Artist:

Necklace by Victoria Lansford

Russian Filigree with Victoria Lansford

June 23 – 25, 3 days, Friday – Sunday, 10:00 – 5:00
Class Fee: $675 | Basic materials included

We had so much fun when Victoria came to teach with us two years ago we just had to have her back. This time she’ll be teaching Russian Filigree. This style of filigree is tension fit and then soldered together. In this three day hands on class you will learn to make scalloped wire, a pendant, a ring, and begin a bead. This is a class you don’t want to miss!

Intermediate Classes:

Total Immersion: Intermediate Jewelry Making

Instructor: Dana Cassera
April 10 – 14, Monday – Friday, 5weekdays, 10:00 – 5:00
Class Fee: $595 | Basic materiala included

Have you already taken our Beginner Series and are looking for a new challenge? Come spend a week in our Total Immersion: Intermediate Jewelry Making workshop. In this five day workshop you will expand upon what you already know and focus on construction and soldering tricks as well as finishing techniques. You will also have the option to learn new stone settings including tube setting and prong setting. Learn about basic hydronic press forming, simple hinges, and creating your own clasp. This class will let you take your jewelry to the next level.

Necklace by Kirk Lang

Faceted Stone Setting Theory and Application: Fancy Stones

Instructor: Kirk Lang
May 6 and 7, Saturday and Sunday, 10:00 – 5:00
Class Fee: $265 | $95 Materials Fee Payable to Instructor

If you have taken our other Faceted Stone Setting workshop on setting round faceted stones (or have equivilent experience) then this is the next course. Kirk Lang will show you how to set a pear shaped, triangle, and princess cut stone. Prong, flush set, and thick bezel setting will all be covered. Finally learn how to set all those fancy stones you’ve been collecting but aren’t sure how to set.

One Day “Quikies”:

What would you commemorate with your spoon?

Let’s Make a Spoon!

Instructor: Bill Dawson
June 17, Saturday, 10:00 – 5:00
Class Fee: $145 | Basic materials included

Metalsmithing techniques aren’t just for making jewelry but has a long history in creating functional ware too. Take a day to make a baby, table, or commemorative spoon. A great introduction to silversmithing without having to take the time and expense of raising a large vessel. A great way to practice your forging skills too!

Andy Cooperman doing what he loves…talking about the flexshaft!

It Ain’t Just a Drill: Getting Most Out of Your Flexible Shaft

Instructor: Andy Cooperman
April 1, Saturday, 10:00 – 5:00
Class Fee: $135 | Tool kit available for purchase

Are you just using your flexshaft to drill, polish, and finish your pieces? Then you are missing out on all the other things this tool can do! Or if you haven’t bought your flex shaft yet but aren’t sure which brand to buy this class is also for you. Andy Cooperman will spend the day explaining how the flex shaft works and what to look for when buying one as well as some innovative tricks that you can try at home.

Brooch by Sarah Wilbanks

Image Transfer on Polymer Clay

Instructor: Sarah Wilbanks
April 29, Saturday, 10:30 – 3:30
Class Fee: $125 | Materials list
Class size limit: 8

If you are interested in incorporating photographs, texture or color into your work, image transfers on polymer clay is a fun and easy solution with infinite possibilities. Creating clear photographic transfers as well as altering the images to conjure unusual textures and rich color will be demonstrated.

 

That’s just a sample of what we have going on for the next three months. We have much more in going on too…go check out our website at www.danacadesign.com for our full schedule!

To register for classes call us at 206-524-0916
or
stop by our location at 5619 University Way NE, Seattle WA

New Year…New Classes!

Happy New Year!

As the new year unfolds we start looking ahead to see what we want to accomplish and what the year has to offer. Which is also an excellent time to see what new classes we have to offer at Danaca Design. Our winter schedule is out and we have a wide variety of classes this quarter from a week long intensive to one day “quickie” classes.

For you long range planners we also have two guest artists coming to teach in 2017 – Victoria Landsford and Deb Karash!

Here are some of the highlights but our whole schedule and more information can be found on our website www.danacadesign.com:

Student ring from this summer's Beginning Immersion class

Student ring from this summer’s Beginning Immersion class

Total Immersion: Beginning Jewelry Making
January 16-20, Monday – Friday, 10am-5pm
Class Fee: $595|Basic Materials Included

Spend a week getting totally immersed in learning to make jewelry! This week long class is all three of our Beginners Jewelry Workshops rolled into one class. Each night you’ll go home dreaming of what you’ll create the next day, designing in your sleep! Absolutely no experience needed.

With cold connections you can add kinetic elements to your jewelry

With cold connections you can add kinetic elements to your jewelry

Cold Connections Beyond Rivets with Kirk Lang
January 28-29, Sat-Sun, 10:30am-5:00pm
Class Fee: $295|Basic Materials Included

Learn some new ways to join two pieces of metal together without soldering. This workshop will teach you how to create an exciting variety of rivets, use micro tap and dies to create custom nuts and bolts, and utilize small tabs to fold over and attach one piece of metal to another. Learn to marry form and function while designing a piece of jewelry or other articulated object with these techniques. Basic jewelry making skills helpful, soldering not necessary.

Micro mosaic by Cynthia Toops

Micro mosaic by Cynthia Toops

Polymer Micro Mosaics for Jewelry with Cynthia Toops
February 25-26, Sat-Sun, 10:00am-5:00pm
Class Fee: $285|Some materials included

Cynthia Toops is widely recognized for her remarkable artistry in polymer clay, most especially for her polymer clay mosaics. In this workshop students will learn her tricks and create incredible micro-mosaics of their own to use like gems in pendants, brooches, and/or rings. No previous polymer clay or metal working experiance is necessary for this exciting workshop.

Winter Class “Quickies”!

enamel bracelet

enamel bracelet

Low Tech Enameling with Allan Thorne
February 13, Monday, 6pm-9pm
Class Fee: $85|Basic Materials Included

Using a torch and a few simple tools, students will learn the basics of enameling in this exciting three-hour workshop. This is a great opportunity to learn how to add vibrant color to your copper and fine silver jewelry. Moderate comfort level with a jeweler’s torch is helpful.

This reticulated silver is ready to be made into jewelry!

This reticulated silver is ready to be made into jewelry!

Silver Reticulation with Juan Reyes
February 19, Sunday, 10:30 – 3:30
Class Fee: $95 | $25 Materials fee payable to instructor

First developed in Russia by Czarist jewelers such as Fabergé, reticulated silver will add exciting and unique 3-dimensional texture to your work. By carefully preparing the surface of the metal and heating with a focused yet delicate torch, this specialized technique reveals a mysterious lunar-like landscape within every piece of silver!

Keum-boo being added to the silver surface.

Keum-boo being added to the silver surface

Keum-Boo: Surface Treatment with Gold with Suz O’Dell
March 19, Sunday, 10:30 – 1:30
Class Fee: $75 | Materials Fee: $35 Payable to instructor, Materials list
In this workshop students will learn to add the luster of gold to their jewelry by applying 24K gold foil to fine silver. The result is dramatic, creating rich color and beautiful textural possibilities with minimal expense. All levels

But that’s just a sample of what we have going on for the next three months. Go check out our website at www.danacadesign.com for our full schedule!

To register for classes call us at 206-524-0916
or
stop by our location at 5619 University Way NE, Seattle WA

Summer Class Highlights

Summer is here and so is the new summer schedule at Danaca Design! We’ve got a full spectrum of classes on the schedule this summer with something for beginners to more advanced students. You can even turn your kids on to metal in our Jewelry Summer Camp for Kids (July 18-22, 9-2)! Here are just a few highlights on our summer schedule but stop by our website to find out more details on all of our classes: www.danacadesign.com

Beginner Classes

Real beginners might consider learning to make a Basic Band Ring (July 9, 10-4) or Rivets (August 20, 10-4). Or if you really want to dive in spend a week learning the fundamentals of metalsmithing in our Total Immersion: Beginning Jewelry Making class:

 

BEGI 2009 Summer Intensive Kristi

Pendant made in Summer Intensive by Kristi

Total Immersion: Beginning Jewelry Making (July 11-15, 10:30-5)

The Total Immersion: Beginning Jewelry Making is the equivalent to taking all three of our Beginning Jewelry Making series workshops. Learn the fundamentals of working with precious metal: sawing, disc cutting and dapping, hammer texturing, roll printing, basic forming and finishing, as well as bezel setting stones. In this beginning silversmithing class students will make individualized jewelry pieces including a pin, pendent, ring and a simple linked project. Each night you’ll go home dreaming of what to create the next day, designing in your sleep. This class is an ideal opportunity to explore a range of techniques, in a condensed time, while creating several projects.

 

Beginning and Intermediate Classes

Beginning and intermediate students can pick-up new skills like Gravity Casting (August 3 & 10, 6:30-9), Anticlastic Forming (July 29-31, 10:30-5), Filigree (September 18-19, 10:30-5) or Chasing and Repousse with Nancy Megan Corwin (August 5-7, 10-5). Or explore new processes such as:

Flora II by Cynthia Toop

Flora II by Cynthia Toop

Cynthia Toops’ Seven Bead Bracelet (September 24-25, 10:00-5)

Explore the wide variety of possibilities in polymer clay for jewelry while focusing on seven unusual beads for a comprehensive sampler bracelet. In this intensive weekend workshop students will investigate various bead shapes, explore hollow and foil cores, surface decoration with simple and complex canes, as well as carving, drawing, onlay, mokumegane and mosaic work. Cynthia is masterful with polymer clay, bringing a creative edge to everything she does. 

Charles Lewton Brain’s Patination of Metals workshop (Aug 26, 9-5)

Patina is the final touch, the icing on the cake, the surface that sets one apart from the crowd; it can add both depth and texture transforming our metal, often unpredictably, into an unimaginably beautiful thing. On metal, patina refers to a thin coating of various chemical compounds such as oxides or sulfates formed on the surface during exposure to atmospheric elements, a common example is rust or the warm brown color of the penny in your pocket. Charles will present safe, easy patination methods for metals that involve easily obtainable (think kitchen chemicals) to produce a wide range of blues, greens, browns, blacks, greys and reddish tones on most metals including precious. Application methods and control of pattern and surface will be described and addressed as a compositional system.

 

Advanced Classes

Experienced students can build skills in Stacking Rings with Gemstones (July 23, 10-4), Unique Settings for Stones and Found Objects (September 10-11, 10-5), Advanced Wax Working (September 21,28, October 5,12,19, November 2, 6:30-9:30) or try your hand at enameling on steel:

 

ESTL_1

Enameling on steel with Melissa Cameron

Enameling Recycled Steel (July 16-17, 9-2) with Melissa Cameron. 

Are there bits of magnetic metal in your studio that you’ve tucked away, swearing that one day you’ll clean them up to make a masterpiece? Enameling is a great way to protect jewelry made from mild steel and is so easy to master. Bring your rusty recycled bits and bobs to Danaca Design in Seattle to learn the skills to turn these into beautiful and unique jewels. Some jewelry making and enameling experience helpful.

 

For full class descriptions, prices, and material lists visit our website: www.danacadesign.com

To register give us a call at 206-524-0916 or stop by our location at

5619 University Way NE, Seattle, WA 98105

Fall 2015 Class Highlights

The weather has gotten cooler, the pumpkin lattes are flowing…it must be fall. Which means new fall classes at Danaca Design! Our full schedule will be arriving on our website any day but in the meantime here are just some of the classes that are available for registration right now:

 

Lots of pointed stones by Kirk Lang

Lots of pointed stones by Kirk Lang

Pointed Stone Setting: Theory and Applications Part II
Instructor: Kirk Lang
November 7 and 8, Saturday and Sunday, 10:00 – 5:00
Class Fee: $295|Some materials included;materials list
Shed your apprehension and learn to set challenging shaped stones in this comprehensive, hands-on weekend with master stone-setter Kirk Lang. Building off, Faceted Stone Setting Theory and Applications: Part I, this more advanced level workshop will instruct students in how to confidently set faceted stones with pointed corners. Prerequisites: Basic jewelry fabrication skills and Theory and Application Part I or equivalent.

 

Chasing and Repoussé brooch by Megan Corwin

Chasing and Repoussé brooch by Megan Corwin

Chasing and Repousse: A Modern Approach with a Traditional Base
Instructor: Megan Corwin
November 13 – 15, Friday-Sunday, 10:00 – 5:00
Class Fee: $450|$10 Materials Fee Payable to Instructor

This is a process oriented beginning class in which students will not only learn to use the tools for chasing and repoussé but will experiment with the extraordinary effects of these tools on sheet copper. Traditional lining and punching will be covered as well as refining techniques and everyone will have the opportunity to make one chasing tool. No experience necessary however returning students welcome.

 

Student using a smith little torch

Student using a smith little torch

Using the Smith Little Torch
Instructor: Micki Lippe
December 5, Saturday, 10:00 – 4:00
Class Fee: $95|Materials list

While there are several torch options, one of the most popular among bench jewelers is a mixed fuel, oxy-propane, and one of the best is the Smith “little-torch”. Micki Lippe, a seasoned professional, will show you why as she demonstrates the versatility and precision of this well-loved tool. Basic soldering experience required. 

 

The flexshaft, one of the most versatile tools at your bench.

The flexshaft: learn it and love it.

It Ain’t Just a Drill: Getting the Most From Your Flexible Shaft
Instructor: Andy Cooperman
December 19, Saturday, 10:00 – 5:00
Class Fee: $135|Tool kits available

So, you’re a jeweler or metalsmith about to be stranded on a desert island. You can bring only one tool. (Oh yeah, the island has electricity). What tool do you bring?
If you were Andy Cooperman you’d most likely bring your Flexible Shaft machine. It may be the most versatile tool at the bench. And yet for many makers it is the most underutilized and least understood. All levels.

 

Want to sign up for one of these great classes?

Call us at 206-524-0916 or stop by to register in person 5619 University Way NE, Seattle 98105 

Monday-Friday 11am-6pm & Sat 10am-6pm

And don’t forget to keep an eye on our website www.danacadesign.com for our complete fall schedule coming soon!